D-Link AC1750 DAP-2680 Wireless Wave 2 Concurrent Dual Band PoE Access Point

Features

Easy to manage with D-Link’s free software-based management solution, Nuclias Connect

Superior throughput with Dual-band transfer speeds up to 450 Mbps in the 2.4 GHz band and 1300 Mbps in the 5 GHz band

MU-MIMO technology improves connection by allowing data transfer with multiple devices at the same time

Band Steering makes sure connected devices get the best available frequency band

Beamforming effectively concentrates signal at the area it is required most, improve both speed and stability

Supports Power over Ethernet (802.3at) for simpler installation with less cable clutter Gigabit LAN port for high-capacity backhaul to the wired network

Supports multiple AP modes to ensure optimization based on your network’s needs

Supports multiple VLANs for enhanced network management and up to 16 SSID setups

Supports WPA3™ - the latest WiFi security for more protection

MAC Address Filtering and WLAN Partitioning ensure control of your network’s access

Captive Portal with industry-standard authentication for enhanced access management

Works as a standalone AP or as part of a centralized, scalable multi-device deployment

Applications

Domestic, Industrial & Commercial Use

Simple, soft-edge design ideal for subtle visibility when wall or ceiling mounted (mounting hardware included)

Specifications

Dimensions : 190 x 190 x 44.8 mm

Environment : Indoor

2.4GHz Speed : 450Mbps

5GHz Speed : 1300Mbps

MU-MIMO and Tx beamforming : Yes

Maximum Output Power : 2.4GHz:26.5dBm 5GHz:26.5dBm

Interface : One 10/100/1000 Ethernet port

Mounting : Wall/Ceiling

PoE Mode : 802.3at

Minimum sell quantity:

Order Quantity Multiple: