Skip to content Skip to navigation menu
click to open Expanded view
SAFE-T-PRODUCTS SAFE-T-PRODUCTS (View All Products)

SAFE-T-PRODUCTS Safe -T - Products - Switch 316 S/Steel Pull Wire - ST--SSB-2-F

  • SAFE-T-PRODUCTS
  • BW#: 00689915
  • Mfr#: STP-SSB-2-F
  • UNSPSC#: 39101600
View Product Options
Login or Register to view price
QTY
SAFE-T-PRODUCTS Safe -T - Products - Switch 316 S/Steel Pull Wire - ST--SSB-2-F
Login or Register to view price
QTY

Features
 • Switch features 3 Independent positive drive mechanisms and IP 67 Rated S.P.D.T Change-over Safety Micro Switches with Direct Opening Action for high safety performance, enclosed in an IP 66/67 high impact 316 2mm electro polished stainless steel enclosure
 • Tamper Proof Switch Plate Mechanism
 • Every switch is individually, electrically and mechanically tested with Test Certificates available
 • Absolute simplicity in initial setup and adjustment. All Set Point adjustments are done from the outside of the enclosure
 • 2mm 316 Electro Polished Stainless Steel enclosure
 • Simple design ensures low maintenance
 • Stainless steel internal compression type springs
 • Electro polished 316 stainless steel pull rods and stainless steel feet
 • Pull rods have spring loaded external dust protecting boots so the pull rod is always covered for extra seal protection and pull rods are not exposed to contaminates
 • Double lip oil seals on pull rods and reset operator for secure dust and weather protection to IP 66 / 67
 • Non-metallic pull rod bushings so no electrolysis issues between the safety mechanism (pull rod) and bushing. Increasing functional safety
 • Independent positive drive pull rod cams, switch plate mechanism and lid drive cam for 3 fail safe trip mechanisms to ensure the switch will trip and fail to safe
 • Complies to IEC 60947-5-1 Ed 3.1 AS/NZS 60947-5-1:2015 IEC 60947-5-5 Ed 1.1 AS/NZS 60947.5.5:2015 AS/NZS 4024.1-2014 AS/NZS 4024.3610:2015 AS/NZS 4024.3611:2015
 • Internal switch connections are fully shrouded for added safety during inspection.
 • IP 67 S.P.D.T Change-over Safety Micro Switches with Direct Opening Action (IEC 60947-5-1 Annex K) in contact element form C tested and passed too IEC 60947-5-1
 • Cam design compensates for pull wire expansion/contraction up to 30mm either side of the set point. Eliminates nuisance tripping due to vibration
 • Pull forces to actuate trip @ 60Nm (6Kg) 90° to pull wire axis and 90Nm (9Kg) along pull wire axis
 • Cam position signal sensing before tripping

Minimum sell quantity:

Order Quantity Multiple:

Technical Specifications
Alternate Products