Wattyl - Epinamel DTM985 High Performance Epoxy - Part B - Standard (formerly Macropoxy 985) - 1 L

Features
 • Wattyl’s most versatile high performance epoxy, Epinamel DTM985 is used across all industries in new construction and maintenance projects
 • Formulated to be applied direct-to-metal, it can be used as a single coat, or as a system with primers and topcoats
 • The product’s most significant feature is its versatility; ranging from corrosion protection, durability, chemical and abrasion resistance, visual appeal and impressive performance in any environment
 • A two-component, surface tolerant, high solids, direct to-metal, high-build, polyamine adduct cured epoxy coating approved to APAS 2973
 • Maintenance coating for use in a wide range of industrial applications as a primer, build coat or finish coat
 • Tolerant to lower grades of steel preparation for atmospheric exposure
 • Excellent re-coatability
 • Excellent abrasion resistance
 • Resistant to splash of alkali, mineral oils, solvents and dilute acids

Applications
 • Epinamel DTM985 is used across all industries in new construction and maintenance projects
 • Maintenance coating for use in a wide range of industrial applications as a primer, build coat or finish coat
 • Suitable for immersion in salt and fresh water
 • Suitable for sewerage immersion applications such as wet wells and storage tanks (both for steel and concrete substrates)
 • Can be applied to existing piling between tides or for new work
 • Can be exposed to water immersion shortly after application
 • Suitable with well-designed cathodic protection systems

Specifications

 • Conforms to AS/NZS 3750.14
 • Conforms to AS/NZS 4020:2018 (factory made white only)
 • Flammable Avoid contact with heat and naked flame
 • Avoid contact with skin and eyes
 • Use gloves, mask and goggles during application
 • Provide adequate ventilation when using in confined spaces
 • This product is intended for use in industrial situations by professional applicators in accordance with the advice given on this sheet. All work involving the use and application of this product should be carried out in compliance with all relevant Health, Safety & Environmental standards and regulations and must not be used without reference to the safety data sheet (SDS)
 • Also availble Part A - 3 Litre
 • Cures down to 0°C with Low Temperature (LT) Part B
 • Mixing ratio by volume: 3A:1B
 • Mix Epinamel DTM985 Part A with Epinamel DTM985/DTS680 Standard or Low Temperature (LT) Part B only

Minimum sell quantity:

Order Quantity Multiple: