Cigweld 306033 Oxygen/LPG Type 44 Size 32GS Straight Gouging Nozzle

Features

• Nozzles are the vital component of flame cutting equipment


• They provide the preheating flames to raise the steel to ignition temperatures and direct the jet of oxygen onto the heated area to perform the cutting process


• Longer Nozzle Life – the high brass content and advanced manufacturing techniques give COMET taper seat nozzles an inbuilt quality


• Better quality cutting – the mirror smooth finish of the gas ports assures stable gas flows and superior cutting oxygen stream


• Cuts are clean and smooth with the narrowest kerf width Less slag adhesion – high copper content of sizes 20, 24 etc conducts heat away from the nozzle face


• The nozzle keeps relatively cool and slag adherence to the nozzle face is reduced


• LPG (propane) flames do not blow off – taper seat LPG nozzles have slotted preheat ports which cause a turbulence in the gas flow enabling the flame to hang on to the nozzles Faster nozzle attachment – easy change of position for bent nozzles


• Only one nut is tightened to give perfect seating with taper seat nozzles


• Wider seating areas ensure gas-tight seals


• Protective flange to safeguard tapered seat from damage

Applications

• Suitable for use with COMET multi-purpose cutting torch

Specifications

• Blowpipe: COMET 3


• Extension Barrel: 307123, 307124, 307125


• Gas Consumption (Fuel): 41-55 l/min


• Gas Consumption (Oxy): 45-58 l/min


• Heat Output:: 180 MJ/HR


• Mixer: 304003


• Model Number: SHA1


• Operating Pressure (Fuel): 100 kPa


• Operating Pressure (Oxy): 150 kPa


• Tip Size: 8x12

Minimum sell quantity:

Order Quantity Multiple:

Catalogue Page Number: 35-74